 |
|||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 BACK |
|
 |
|
 |
|
BERTScope DPP
Digital Pre-Emphasis Processor |
|
 |
|
|
|
BERTScope SATA Tee |
|
|
|
|
|
BERTScope
PPK Passive Probe Kit |
|
|
|
|
|
BERTScope
Differential ISI Board |
|
|
|
 |
|
BERTScope Matched
Cable Set |
|
 |
|
|||||||||||||||||||
|
A set of matched clock and data connector cables
is available as an accessory to the Clock Recovery
instrument. These cables are designed and manufactured
to exacting tolerances, eliminating any need
to compensate for cable disparity during testing.
Spread spectrum clocks exhibit low frequency (30-33 kHz) modulation, for example, resulting in 225 UI deviation when imposed on a 3 Gb/s data signal. This frequency deviation is tracked accurately by the clock recovery instrument when the optional five-piece cable set is used. The cable set is matched to compensate for the 5 ns delay in a BERTScope Analyzer with SSC signals, thus avoiding jitter amplification. The set of five high performance cables is able to compensate for clock-to-data delay in the BERTScope CR or BERTScope Analyzer. The Huber+Suhner high performance cables include phase matched pairs of data input (1-meter) and data output (2-meter) cables, and one 0.2-meter clock out cable. Ordering Information:
Contact your sales representative for more information, or to order. |
|||||||||||||||||||
